Specifications

Hurricane Track SERVICING BEARINGS

Always clean tip of grease gun fitting and grease fitting on machine before attaching hose

to prevent dirt from being forced into machine parts. After applying grease, remove excess

grease from the grease fitting to prevent dirt build up.

There are four (4) bearings on the jackshaft;

two (2) mounted on the inside of the

supports and two (2) mounted on the outside

of the supports. These bearings should be

greased daily to keep dirt and moisture out.

Do not purge these bearings with grease.

PROPER MAINTENANCE IS

CRITICAL TO ENSURE LONG

BEARING LIFE.

There are two (2) bearings on the cutter

wheel shaft. These bearings should be

purged until new grease is seen before and

after every use, to keep dirt and moisture

out. PROPER MAINTENANCE IS

CRITICAL TO ENSURE LONG

BEARING LIFE.

** Your machine is lubed with Texaco® Starplex II grease when it is delivered from the

factory. Starplex

® II is lithium complex soap grease, which contains a specially formulated

additive package to provide excellent rust protection, resistance to water washout, and

extreme pressure properties. It is recommended as a multipurpose, high performance

grease for severe duty industrial applications involving high temperatures, water

contamination, and shock loading. Operating temperature range is from 450 F to -15 F.