Specifications
Hurricane Track MACHINE MAINTENANCE
28
• Check hydraulic oil daily and replenish
as necessary. A site glass is provided for
easy viewing. If oil can be seen in glass,
there is enough oil in the tank. Do not
fill the tank more than 7/8 full; operating
at high temperature will cause oil to
expand and spill over if tank is full.
• The machine is equipped with Citgo
AW32 hydraulic oil at time of
manufacture; use same or equivalent.
• Inspect all guards, bolts, nuts and other
parts daily for looseness and wear,
repair as necessary.
• Inspect wiring harnesses for wear and
replace if necessary.
• Check cutter wheel, pockets, and teeth
for wear daily. If any repair is needed,
see Servicing Cutter Wheel section for
further instruction. DO NOT run
machine without a complete set of teeth
installed in cutter wheel.
• Check and tighten setscrews in cutter
wheel bearing collars weekly.
•
• Check and tighten setscrews in jackshaft
and boom bearing collars weekly.
CUTTER WHEEL
BEARING COLLAR
SETSCREW
BOOM BEARING
COLLAR
SETSCREW
JACKSHAFT
BEARING
COLLAR
SETSCREW