Specifications

Hurricane Track MACHINE CONTROLS
17
PT TECH CLUTCH CONTROL
• The PT TECH Clutch control console is
located at the operators’ station. The
engine must be at idle to engage or
disengage the PT TECH clutch. With
the engine at idle hold the
engage/disengage button until the green
engage light comes on. The PT TECH
clutch will now go through a series of
bumps to get the cutter wheel started.
• The Power LED light in the upper left
illuminates green to show the clutch is
receiving switched power from the
ignition.
• The Engine Speed Detected LED light
illuminates when the engine is running.
• The green Clutch Engaged symbol
illuminates when the clutch is engaged.
• The red RPM Too High symbol
illuminates if the operator tries to engage
the clutch with the engine above idle.
Please refer to the PT TECH Manual for
more information regarding the clutch.
ENGAGE/DISENGAGE
BUTTON
NOTE: UNPLUG CONTROLLER
BEFORE WELDING ON MACHINE