Specifications

Hurricane Track MACHINE CONTROLS
16
SWING ROTATION
• The third lever, in the middle, is the
swing rotation and moves the machine
back and forth in a right and left rotation
as well as a continuous 360° rotation.
DO NOT GRIND STUMPS USING
THE MACHINE MOUNTED SWING
ROTATION LEVER.
SWING BRAKE
• The swing brake switch locks or unlocks
the swing brake. The brake must be
unlocked to operate the swing rotation
lever and move the cutter head from left
to right. Keep the swing brake locked
when the engine is turned off; if a person
must be close to the machine for any
reason; the machine is being transported;
for travel to, from and around the job
site; or if the machine is to be serviced.
SCRAPE BLADE
• The fourth lever, from the left, operates
the scrape blade, when supplied, moving
it up and down. Use the scrape blade by
pushing the control lever down. When
not in use or when moving the machine,
raise the scrape blade by pushing the
control lever up.
MURPHY BY-PASS
• The Murphy control is a by-pass that
automatically determines if conditions
are correct for starting the engine and
also displays engine problems such as oil
temperature and oil pressure.
SWING BRAKE
LOCK/UNLOCK
SWITCH