Specifications

Hurricane Track MACHINE CONTROLS
14
THROTTLE
The radio control transmitter has a
throttle switch for the operator to control
the engine speed. Push the switch away
from the operator to increase the engine
speed and pull the switch toward the
operator to decrease engine speed. The
engine speed must be at idle to engage
the cutter wheel.
CLUTCH
The clutch can be engaged from the
transmitter. To start engagement of the
clutch, make sure the engine is at idle
and push the clutch switch away from
the operator. The switch must be held in
this position for 3 seconds to allow the
clutch to start to engage thus engaging
the cutter wheel. There is more
information about the PT Tech clutch
supplied later in this section of the
manual.
THROTTLE SWITCH CLUTCH SWITCH