Specifications
Hurricane Track SAFETY PRECAUTIONS
7
Be Safe and Practice Safe Operation using the following guidelines.
• Any individual operating this machine must first read
and understand this manual, the engine manual, all
component manuals, and all safety decals on machine.
• DO NOT permit children to operate machinery or to
play near machinery during operation.
• Always wear face shield and hearing protection during
operation. Loud noise and flying debris may cause
severe injury.
• Keep hands, feet, legs, clothing, hair and all other body
parts away from cutter wheel and other moving
machine parts to eliminate the possibility of injury.
• Use extreme care when positioning the machine using
the hand controls, if the operator’s foot or leg gets run
over by the track severe injury will occur.
• DO NOT operate the swing lever when operating hand
controls. KEEP the swing motor in the locked position
when operating hand controls or when servicing the
machine.
• BE AWARE that the machine table rotates when the
swing rotation is activated. All people must stay clear
of machine when swing rotation is activated.
• Shut down machine completely and remove key before
removing debris from work area (i.e. clearing rocks,
wood chips, etc.).
• DO NOT modify or change any part without written
approval from J. P. Carlton Company.
• Do not ride, sit, stand, lay or climb anywhere on this
machine during operation, while running, or during
transport.
• Do not move, position, or transport this machine while
cutter wheel is engaged.
• Do not refill fuel tank while engine is hot, running, or
indoors. Danger of fire or explosion exists.
• Fuel and its vapors are highly flammable and explosive.
Handle with care. Only use approved (red) fuel
containers for storage.
• Do not store fuel containers near any open flames,
sparks or other sources of ignition.
• Do not store equipment with fuel in the tank.