Specifications

Hurricane Track MACHINE SPECIFICATION
4
Hurricane RS
General:
Weight: ------------------ 8500 Pounds
Length:-------------------170”
Height: ------------------- 83”
Width:--------------------65”
Controls: ----------------- Wireless Remote w/ Tether
Back Up
Fuel Capacity:----------- 36 Gallons
Battery:-------------------800 CCA
Track Length: ----------- 81”
Track Footprint: -------- 12”
Wireless Remote:-------Full Proportional Control
Engine:
(Varies depending on selection of engine make & model)
Manufacturer: ----------- John Deere 4045T Turbo Diesel
Number of Cylinders: -- Four
Bore: --------------------- 4.19 Inches (106 mm)
Stroke: ------------------- 5.0 Inches (127 mm)
Displacement: ----------- 276 Cubic Inches (4.5L)
Maximum RPM:-------- 2400 RPM
Horsepower:------------- 125HP (93KW)
Torque:------------------- 328 Ft Lbs (445Nm)
Cooling Medium:-------Liquid Water/Antifreeze
Mixture
Air Cleaner: ------------- Two Stage Dry Type
W/ Service Indicator
Oil Filter: ---------------- Full Flow Spin On
Electrical: ---------------- 12 Volt
Crank Shaft Support:--- Clutch Output
Gauges: ------------------ Oil Pres, Water Temp, Amp,
Tachometer
Bearings:
Jackshaft Bearings:-----2 7/16” Tapered Roller
Boom Bearings:--------- 3 15/16” Tapered Roller
Cutter Head Bearings: - 2 15/16” Tapered Roller
Swing Bearings: --------30” Kaydon Table Bearing
Rated at 250,000 ft. lbs.
Cutter Wheel
Wheel Diameter:-------- 31” with Teeth
Wheel Thickness:------- 1 1/2” Blanchard Ground
Wheel Speed: ----------- 860 RPM
Number of Teeth:------- 48
Chip Guards: ------------ 3/16” Steel Mounted
Cutting Dimensions
Below Ground ---------- 25”
Above Ground ----------53”
Cutting Width ----------- 18’ Diameter
Continuous 360° Rotation
Hydraulic System:
Hyd Pump Displcmnt: -Variable Displacement Pressure
Comp.
Hyd Pump Drive Sys: --Direct Drive off Engine Mount
Flow: ---------------------Variable
System Relief:-----------2750 PSI
Oil Tank Capacity: -----31 Gallons
Oil Type:-----------------AW32
Valve: --------------------Proportional Solenoid Type
Hose: ---------------------16,000 PSI Burst - Exceeds SAE
100R2
Oil Filter: ----------------10-Micron High Capacity Return
Lift Cylinder:------------4” x 16” with 1 3/4” Rod
Blade Cylinder: ---------4” x 8” with 1 3/8” Rod
Swing Motor:------------Continuous Rotation w/Brake Lock
Oil Cooler:---------------190 Sq Inches w/ Electric Fan
Drive System:
Engine Sheave:----------6B8.0
Jackshaft Sheave: -------6B18.4
Drive Belt: ---------------6B173
Jackshaft Sprocket: -----14M-38S-125
Cutter Head Sprocket:--14M-56S-125
Drive Belt: ---------------14M-3136-125
Jackshaft: ----------------2 7/16”
Cutter Head Shaft: ------3” Turned to 2 15/16” @ Bearing
Engine Engagement: ---Clutch Actuated
Belt & Chain Shields: --3/16” Metal Bolt On
Frame:
Frame Tube: -------------4” x 8” with 1/2” Wall
Boom Tube: -------------6” x 6” with 1/2” Wall
Boom Box: --------------3/8” Fabricated Plate
Bearing Supports:-------1 1/2” Plate
Turntable Plate: ---------1” Plate
Turntable Frame:--------2” x 5” Tube with 3/8” Wall
Inner Frame:-------------2” x 3” Tube with 1/4” Wall
Brush Guard: ------------2” x 2” Tube with 1/4” Wall
Perforated Guard:-------1/8”