Specifications
I & M BULLETIN
HPTO8TD-100
HYDRAULIC POWER TAKE-OFF
Page 5 of 5
22. Remove two seals from endcover
(Items 16 & 12).
23. Clean area around manifold and
endcover.
Important: Keep endcover and
manifold ports clean and free from
debris.
24. Remove four bolts (Item 45) from
manifold and remove manifold (Item
48).
25. Remove piston (Item 20), o-ring (Item
40) and die spring (Item 23).
REBUILD INSTRUCTIONS
Refer to exploded view drawing
HPTO10TD-100 sheet 2 of 2.
Endcover Assembly
1. Apply Loctite 620 to steel cage of seals
(Items 16 &12).
2. Install qty of 2, seals (Items 16 &12)
into bore in endcover (Item 2). Press
seals lightly. Note the direction of seal
lip on drawing per Figure 1.
Figure 1
3. Apply Mobilfluid 424 oil or similar to
seal lip (Items 16 & 12).
4. Install qty. of 2, retaining rings (Items
25, 24) and verify retaining rings are
seated in grooves.