Specifications

I & M BULLETIN
HPTO8TD-100
HYDRAULIC POWER TAKE-OFF
9/11/2007
12
of
12
REVISION LOG SHEET
REV DATE INITIALS CHANGES MADE
1/10/02 MC/glj Newly created in word.
A 2/26/02 BH Added Wiring Schematic and Hydraulic Schematic to end of file.
B 4/5/02 BH Added Controller Functions section and updated troubleshooting
section.
C 4/24/02 BH Added installation of speed pickup by customer.
D 8/26/02 BH Speed pickup was set at 1-1/4 turns out. Shielded wire was
connected to pin 12. Now spliced into pin 11.
E 11/21/02 BH Updated CMCCU-004 drawing with simplified controller cutout.
F 1/16/03 BH Updated controller functions per firmware B1030106A.
G 2/3/03 BH/cc Added attention note about no washers under the heads of the
flywheel bolts.
H 9/4/03 BH Updated controller callouts to match that of controller decal.
I 11/25/03 BH Updated hydraulic schematic to callout ¾” hose for HPTO12 unit.
J 12/29/03 BH Removed controller documentation and created a separate
controller I&M Bulletin.
K 1/26/04 BH Added warning against pressurizing the manifold drain port to
lock disc pack during installation.
L 4/19/04 BH/rr Updated hydraulic schematic to add 3D view.
M 8/18/04 BH/mc Moved spherical bearing to contact shaft step.