User's Manual

Trailblazer Installation and User Manual version 1.03
25
This device has been designed to operate with the antenna listed below, and having a
maximum gain of 16 dB. Antennas not included in this list or having a gain greater than
16 dB are strictly prohibited for use with this device. The required antenna impedance is
50 ohms.
WARNING! YOU CAN BE KILLED!
The Trailblazer system is designed to be installed by professionally trained installers
only! Failure to follow basic installation procedures and safety precautions can result in
one or all of: damage to tools and/or equipment, interference with and/or damage to
other equipment or accessories, violation of safety code, local laws and/or building
codes, personal injury or even death.
Detached antennas, whether installed indoors or out, should be installed ONLY by
experienced antenna installation professionals who are familiar with local building and
safety codes and, wherever applicable, are licensed by the appropriate government
regulatory authorities. Failure to do so may void the CWT product warranty and may
expose the end user to legal and financial liabilities."
"Regulations regarding maximum antenna gains vary from country to country. It is the
responsibility of the end user to operate within the limits of these regulations and to
ensure that the professional installer is aware of these regulations, as well. "
Installations of the Trailblazer System require topographic analysis, site survey, and link
budget calculation; therefore CWT trained professionals are required to perform the
installation.
4.2.1 Marketing and Sales Channels
CWT DOES NOT sell the Trailblazer PRO direct to end users. i WLL Trailblazer PRO
System will be sold only to CWT's Authorized Resellers. Those authorized resellers are
technically trained by CWT's Engineers periodically and must follow the rules set by
CWT. The Trailblazer PRO system is designed for Long Range (15-35 miles)
applications and it involves a complicated mandatory site survey, roof top mast
installation, high gain antennas, accurate antenna alignment, etc. Those activities can
be done ONLY by professional installers that are familiar with the FCC regulations.
CWT does not sell the Trailblazer PRO in the consumer business at all. We have no
resellers in this market and we do not advertise in consumers based publications or
attend consumer oriented trade shows. The system will be advertised in technical trade
shows and magazines.
4.2.2 Calculating the EIRP of an External Antenna
For the 5.8 – 5.9GHz bands of frequency, the output of the Trailblazer TB series radio is
calibrated at the factory to limit the peak power output to +7dBm.