User's Manual

Trailblazer Installation and User Manual version 1.03

4 Field Installation Options

4.1 Mounting the Enclosure

The versatile mounting bracket assembly (PN: 900-7200) allows the Trailblazer

enclosure to be properly mounted on a pole up to 2.25” in diameter. The mounting

bracket assembly also converts to a wall mount for mounting the Trailblazer enclosure

on a flat surface. See below for details for the two different mounting applications.

Figure 6: Wall mounting the Trailblazer enclosure

Wall Mounting Instructions:

 Attach the mounting flanges to the enclosure using the ¼ -20 x 1” bolts,

¼” flat washers, ¼” lock washers, and ¼” hex nuts.

 Tighten the ¼” nuts to maximum of 25 in-lbs (2.1 ft-lbs). Do not over

tighten!

 Position the enclosure on the wall.

 It is recommended that you attach the enclosure to the wall using a lock

washer and fasteners of your choice as shown in figure 2.

 Tighten the fasteners of your choice. Do not over tighten!