User's Manual

Trailblazer Installation and User Manual version 1.03
3
On-board Ethernet satisfies simultaneous LAN / IP data and PCM voice needs with an
Industry Standard RJ45 10BaseT connection. Some of its advanced features include
802.3 Ethernet supported by Transparent LAN bridging and Automatic LAN MAC
address filtering at the MAC level, making it transparent to higher level protocols such
as TCP/IP, DECnet, NETBIOS, and IPX network protocols. Broadcast, multicast, or
frames set up for peered LAN are forwarded while reserving maximum RF bandwidth.
1.2.2 General Specifications
Note: More technical details are found in the Appendix of this manual
Product Description Digital Microwave Radio with POTS, Leased
Lines and 10BaseT / V.35 port
Data Interfaces
Primary Serial Data Port (1) RJ45 port providing 10BaseT
Data Rate and Type 256/512 kbps, synchronous
Serial Command Port RS 232, 57.6 kbps, N, 8, 1, No flow, Echo on
Latency < 4.4ms depending on speed selected
Power Requirements
Input Voltage 12 to 24 VDC or 100-260 VAC with AC power supply
(optional)
Power Consumption 2 Watts (not including add-on cards)
Battery Backup (optional) Up to 8 hours with a 2.2mAh SLA battery.
RF Specifications
RF Frequency Range 5.865 to 5.885Ghz, 5.895 to 5915Ghz
Modulation Type BPSK (256) or QPSK (512kbs) DSSS
Transmitter Output Power +20dBm max, auto set for CDMA operation
Receiver Sensitivity (10
-6
BER) -93dBm @ 256 kbps, -90dBm @ 512 kbps
Operating Temp -30 to +60 Degrees C with solar shielding,
0-90% Non-Condensing
Physical Characteristics
Enclosure Dimensions 13 x 11 x 6 in / 33 x 28 x 15 cm
Unit Weight 8 lbs / 3.7kg
Enclosure Specifications NEMA 4X, rain, wind and ice protected GE
Valox99
®
polycarbonate w/ neoprene gasket
Mounting 1”-2.25” or 2.5cm-5.7cm pipe/pole
2 Pretest and System Planning