User's Manual

Trailblazer Installation and User Manual version 1.03

bandwidth PCM POTS or Leased Line cards for high quality, uncompressed audio with

an excellent signal-to-noise ratio.

Easy Installation

The units mount on a 1.5"- 3" pipe or pole or to any vertical surface, use an external

antenna, and have their own power supply (optional) or operate on 12-24 VDC, easily

Low Power Draw: Ideal for Solar Applications

The low power consumption of 2 Watts makes the units very energy efficient. They

accept any DC voltage from 12V to 24V and are thus easily powered by solar. CWT

solar powering kits are available with up to 7 days of back-up power.

Flexible & Programmable

All Trailblazer models are bench or field programmable. Using the GUI (Graphical User

Interface) application with a Windows PC and serial COM port, you can configure the

amount of bandwidth, allocate voice and data channels, select different frequencies and

CDMA codes, use antenna alignment aids and other diagnostic tools, as well as

upgrade software and firmware. The Trailblazer models support all CLASS features,

fax, and V.90 dial-up modems.

Rugged & Weatherproof

All components, including the digital radio cards, multiplexer, power supplies & CPU,

are fully integrated into the 8lb/ 3kg waterproof enclosure. The units are housed in a

NEMA 4X waterproof enclosure, built to last in tough climates. The lockable

polycarbonate enclosure with a neoprene gasket will protect against wind, rain, and ice

ensuring years of service.

License Required for the 5.9 MHz

The Trailblazer TB 5.9 uses the, in most countries, the license 5.9 GHz frequency

bands, while fully encrypted spread-spectrum CDMA modulations, proprietary framing

structure and packet size assure complete privacy and security.

Standard ISO 2593 V.35 DTE port

Because the Trailblazer models feature a standard ISO 2593 V.35 DTE port, most other

V.35 devices plug right into the Trailblazer Phone Extender.

Repeater Mode

This product can be used as a digital repeater by simply connecting two units via the

V.35 data port and optional repeater cable.

Expandable

Starting with only one link, you can add CPE units, gaining the features of a point-to-

multipoint topology for your current and future growing needs without loosing any of

your original investment.

10BaseT On-Board Ethernet Port