User's Manual

Trailblazer Installation and User Manual version 1.02 28
4.3 18dBi 2.4 GHz Directional Flat Panel Antenna
This section is designed to support the installation, operation and maintenance of
the 18dBi directional flat panel antenna. Due to it’s small size, ease of mounting
and low maintenance it is most commonly used in conjunction with the
Trailblazer system. To avoid harm to persons or damage to the product please
ensure that you have read through the safety, unpacking and installation sections
before proceeding.
4.3.1 Product Overview
The 18dBi directional flat panel antenna includes adjustable Heavy Duty brackets
to provide down or uptilt mounting to a mast up to 2.88 inch O.D. (2.5 inch
schedule 40 pipe). These outdoor antenna systems are designed to provide
maximum gain in the 2.4GHz band as well as survive high wind environments.
Refer to the “Product Specification” Section for specifications and characteristics.
Key Features and Benefits:
• Patented printed circuit board design. Best performance-to-price
ratio.
• Attractive, low profile UV stable housing. Blends well with indoor
and outdoor environments where aesthetic considerations are
important.
• Corner exit RG-58/U pigtail design. Permits the panel to be
mounted in vertical or horizontal polarity.
• Adjustable mounting brackets for outdoor mounting. Provide
maximum flexibility for outdoor installations.
4.3.2 Unpacking
The 18dBi directional flat panel is smaller in size and therefore may be packaged
with other items. Thoroughly inspect the package and the antenna inside before
proceeding. Immediately report any damage to the shipper.
4.3.3 Mounting
Included with the antenna you will find the MPAB8 TILT MOUNTING BRACKET.
The MPAB8 tilt mounting bracket is used to provide down or uptilt mounting to a
mast up to 2.88 inch O.D. (2.5inch schedule 40 pipe). You will need a 7/16”
wrench or #2 Philips screwdriver, a 9/16” open end wrench, vapor wrapping
materials and cable ties to properly complete this 3-step installation.