User's Manual
Trailblazer Installation and User Manual version 1.02 24
4 Field Installation Options
4.1 Mounting the Enclosure
The versatile mounting bracket assembly (PN: 900-7200) allows the Trailblazer
enclosure to be properly mounted on a pole up to 2.25” in diameter. The
mounting bracket assembly also converts to a wall mount for mounting the
Trailblazer enclosure on a flat surface. See below for details for the two different
mounting applications.
Figure 6: Wall mounting the Trailblazer enclosure
Wall Mounting Instructions:
• Attach the mounting flanges to the enclosure using the ¼ -20 x 1”
bolts, ¼” flat washers, ¼” lock washers, and ¼” hex nuts.
• Tighten the ¼” nuts to maximum of 25 in-lbs (2.1 ft-lbs). Do not
over tighten!
• Position the enclosure on the wall.
• It is recommended that you attach the enclosure to the wall using a
lock washer and fasteners of your choice as shown in figure 2.
• Tighten the fasteners of your choice. Do not over tighten!