User's Manual

Trailblazer Installation and User Manual version 1.02 19
Click on the Terminal tab to monitor
status, view and log real-time link
quality reports and manually
interface with the Trailblazer radio
cards via the Terminal screen. In the
middle of the terminal screen you will
notice a command line box. One
command at a time may be entered
and sent to the radio card via this
terminal interface or by using
terminal software.
3.2 Accessing the Trailblazer using HyperTerminal™
3.2.1 Windows™ HyperTerminal™ Software
As a secondary precaution, as well as to allow user access to advanced
configurations, such as allocation of bandwidth to data and voice lines not
supported by the GUI software, the Trailblazer system is alternately equipped
with a terminal interface. If you do not have access to a PC with the Windows™
operating system or have trouble with the GUI software, many diagnostic and
setup tasks can be performed with a basic terminal program such as Windows
HyperTerminal™. See Section 6.4 in the Appendix for connection instructions,
settings and usage.
3.3 Setting the Radio Frequency and Scrambling Code
Figure 4: Rotary Switch and Reset Button
Radio
Frequency
Selector
Reset
Switch
GUI showing status of a CPE terminal