User's Manual

Trailblazer Installation and User Manual version 1.02 2
our 64kbps full bandwidth PCM POTS or Leased Line cards for high quality,
uncompressed audio with an excellent signal-to-noise ratio.
Easy Installation
The units mount on a 1"- 2.25" pipe or pole or to any vertical surface, use an
external antenna, and have their own power supply (optional) or operate on 12-
24 VDC, easily powered by solar.
Low Power Draw: Ideal for Solar Applications
The low power consumption of 2 Watts makes the units very energy efficient.
They accept any DC voltage from 12V to 24V and are thus easily powered by
solar. CWT solar powering kits are available with up to 7 days of back-up power.
Flexible & Programmable
All Trailblazer models are bench or field programmable. Using the GUI
(Graphical User Interface) application with a Windows PC and serial COM port,
you can configure the amount of bandwidth, allocate voice and data channels,
select different frequencies and CDMA codes, use antenna alignment aids and
other diagnostic tools, as well as upgrade software and firmware. The Trailblazer
models support all CLASS features, fax, and V.90 dial-up modems.
Rugged & Weatherproof
All components, including the digital radio cards, multiplexer, power supplies &
CPU, are fully integrated into the 8lb/ 3kg waterproof enclosure. The units are
housed in a NEMA 4X waterproof enclosure, built to last in tough climates. The
lockable polycarbonate enclosure with a neoprene gasket will protect against
wind, rain, and ice ensuring years of service.
No License Required for the 2.4 and 5.8 GHz, Simple license for 4.9 MHz
Private and Secure
The Trailblazer TB 2.4-5.8 uses the, in most countries, the license-exempt 2.4
GHz or 5.8 GHz frequency bands, while fully encrypted spread-spectrum CDMA
modulations, proprietary framing structure and packet size assure complete
privacy and security.
Standard ISO 2593 V.35 DTE port
Because the Trailblazer models feature a standard ISO 2593 V.35 DTE port,
most other V.35 devices plug right into the Trailblazer Phone Extender.
Repeater Mode
This product can be used as a digital repeater by simply connecting two units via
the V.35 data port and optional repeater cable.
Expandable
Starting with only one link, you can add CPE units, gaining the features of a
point-to-multipoint topology for your current and future growing needs without
loosing any of your original investment.