Operator's Manual

PRELIMINARY RELEASE
*** This is a confidential document. Do not distribute. ***
by ei
ther
installer.
On the “Basestation Details” page, click the “Messages” tab.
The l
ast few messages should include “Radio Connected!” and “Completed Initialization”.
Figure 11: Messages Listing
Veri
fy that the message dates and times are correct for system initialization.
If “Radio Connected!” and “Completed Initialization” messages are not displayed, then
troubleshoot your Internet connection and/or wait another 3-5 minutes. If the system still fails to
initialize, contact Carlson Support.
2.9.4. Verifying Geographical Coordinates
Click the “Properties” tab.
Under “Station Enti
ties”, select the “Legacy Properties” drop-down tab.
Figure 12: Properties Tab
Scroll
down to view latitude and
longitude information.
Veri
fy the latitude and longitude
information is correct for the
Basestation. Geographic
coordinates shall be determined to
an accuracy of ±50 meters
an incorporated geo-location
capability or a professional
Figure 13: Latitude/Longitude Settings
Page | 13