User's Manual

FT-512 Trailblazer Installation and User Manual version 1.08 52
frames across the frame relay backbone. See also encapsulation and frame-relay-
capable interface device.
IP
internet protocol. A protocol which provides for transmitting blocks of data
between hosts identified by fixed-length addresses.
ISDN
integrated services digital network. A network architecture that enables end-to-end
digital connections. The network supports diverse services through integrated
access arrangements and defines a limited set of standard, multipurpose
interfaces for equipment vendors, network providers, and customers. Inter-working
with a public switched telephone network is retained.
local area network (LAN)
A privately owned network that offers high-speed communications channels to
connect information processing equipment in a limited geographic area.
MIB
management information base. A database of network management information
used by SNMP.
multi-point
A configuration or topology designed to transmit data between a central site and
a number of remote terminals on the same circuit. Individual terminals will
generally be able to transmit to the central site but not to each other.
out-of-band
Signaling that is separated from the channel carrying information (voice, data,
video, etc.). Typically the separation is accomplished by a filter. The signaling
includes dialing and other supervisory signals.
packet
A message containing both control information and data. The control information
is used for routing the packet through a network to its final destination.
Contrast with frame relay frame.
packet-switching network
A telecommunications network based on packet-switching technology, wherein
a transmission channel is occupied only for the duration of the transmission of
the packet. Contrast with frame relay network.
parameter
A numerical code that controls an aspect of terminal and/or network operation.
Parameters control such aspects as page size, data transmission speed, and
timing options.
ping
An internet protocol standard that provides loopback on demand for any device
in an IP network. One device "pings" another by sending a loopback request to
the device's IP address.
point-to-point
Type of communications link that connects a single device to another single
device, such as a remote terminal to a host computer.
remote configuration