User's Manual
FT-512 Trailblazer Installation and User Manual version 1.08 41
6.5 Cable Pin outs
6.5.1 Configuration Port Pin out
A DB9 pin Female to be fit in the PC is wired with:
DCD on pin 1, (not used)
TX Data on pin 2,
RX Data on pin 3,
DTR on pin 4, (not used)
SG (signal ground) on pin 5
DSR on pin 6,
RTS on pin 7,
CTS on pin 8,
RI on pin 9, (not used)
A DB9 pin Male to be fit in the FT-512 is wired with:
Rx Data to pin 2,
Tx Data to pin 3,
DSR to pin 4,
SG (signal ground) to pin 5
CTS to pin 7,
RTS to pin 8,
6.5.2 Synchronization Port Pin out
A DB9 pin Male to be fit in the signal source master, is wired with:
SYNC_OUT+ on pin 2,
SYNC_OUT- on pin 8,