User's Manual

24
Figure 14: Selecting the Operating Channel
As a default we have selected 2.424, 2.448 and 2.460 GHz.
3.1.9 POTS Lines and Onboard V.35 Port Setup
Figure 15: GUI - POTS lines and onboard V.35 port
This screen allows one to implement a mixture of POTS and V.35 synchronous
serial data services. At the bottom of the screen calculations show original, used
and remaining bandwidth capacity. You can select a mix of services until the
unused is zero. Always hit the apply button and wait until the progress bar has
completed before exiting the screen.
3.1.10 QUAD V.35 Port Add-on Card Setup Information
Figure 16: GUI - Quad V.35 Port Setup
This screen allows one to implement up to four V.35 synchronous serial data
ports operating at different clocking rates. At the bottom of the screen
calculations show original, used and remaining bandwidth capacity. You can
select from individual ports until the remaining Kb/s is zero. Always hit the apply
button and wait until the progress bar has completed before exiting the screen.