User's Manual

FT-512 Trailblazer Installation and User Manual version 1.09 22
Carrier Detect) & CTS (Clear To Send), CTS will only go high if RTS is
high. If the Trailblazer’s elastic buffer fills up, it will lower CTS.
Link Always Up. This is set to “Yes” if the system is designed for “always up”
data use. If the system is used for POTS telephone service and should be off air
when idle, then the switched position of “No” would apply.
CDMA Code. We allow 4 non orthogonal codes to be used. This can be
beneficial for reusing frequencies within a given area. The paths need to be
isolated by 30dB and the units synchronized when collocated.