User's Manual

FT-512 Trailblazer Installation and User Manual version 1.09 18
Figure 9: Sync and Bus Port
• Pin 2 of the first connector runs to pin 3 of the second.
• Pin 8 of the first connector runs to pin 7 of the second.
•
This pattern is repeated for additional units as follows:
• Pin 2 of the second connector runs to pin 3 of the third.
• Pin 8 of the second connector runs to pin 7 of the third.
• etc.
When using the rack mount card cage the backplane automatically handles the
synchronization needs
Sync and Bus Port