User's Manual

FT-512 Trailblazer Installation and User Manual version 1.09 5
1.5 General Specifications
Note: More technical details are found in the Appendix of this manual
Data Interfaces
Primary Serial Data Port V.35 using a DB 25 Connector (RS-422/RS-
232)
Data Rate and Type 256/512 kbps, Synchronous
Command Port RS-232, 9600 bps, N,8,1
Latency less than 5 ms.
Power Requirements
Input Voltage 12 to 48 Vdc
Power Consumption 2 Watts in full operation (does not include add-
on cards)
RF Specifications
RF Frequency Band 2.400 to 2.4835 GHz
2.350 to 2.500 Optional for export only!
RF Channels Programmable in 1 MHz steps
RF Signal Bandwidth 12 MHz (7 non overlapping channels)
PN Code Rate 11 M chip/sec
PN Code Length 16
Spreading codes 4 programmable non orthogonal codes
Processing Gain 12.04 dB
Modulation Type BPSK (256) or QPSK (512kbs) DSSS
Transmitter Output Power +17dBm, set to allow CDMA operation
Receiver Sensitivity (10
-6
BER) -93 dBm @ 256 kbps, -90 dBm @ 512 kbps
Operating Temp -30 to +60 Degrees C with solar shielding
Mechanical
PCB dimensions 5 in. x 6 in. x 1 in.
PCB weight 0.5 lbs