User's Manual

FT-512 Trailblazer Installation and User Manual version 1.09 2
1.2.1 Main Features
512 or 256 kb/s Synchronous Data Stream with Frame Sync – Structured for
high quality PCM voice use, V.35 serial data peripherals, or optionally an 10
MB/s Ethernet network port.
Full configurable through a PC – Simplify the setup using our Graphics User
Interface application – Data speed, CDMA code, Clocking, Master/Slave and
selection of the user frequency pool are configurable in minutes with a serial
Com port.
Repeater – This product can act as a repeater by just connecting the serial data
port back to back with another unit and setting the external clock to yes on the
master side.
Standard ISO 2593 V.35 DTE port – plugs right in to most V.35 devices
Low Power Draw – The FT-512 uses between ½ to 2 watts of power and
accepts any voltage between 12 and 48 VDC.
Very Expandable- You can start out with only one link and, utilizing a card cage,
continue to add cards linking together the data and thus gain the features of a
point to multipoint topology. Thus you can continue expanding without loosing
any of your original investment.
Private and Secure – Encrypted CDMA spread spectrum modulation,
proprietary framing, structure and packet size assures complete privacy.
Wire-line Quality Voice and Data – Data speeds are selectable up to 512 kb/s.
Designed to integrate seamlessly with our full bandwidth 64kb PCM POTS cards
for high quality voice line/trunks.
Optional 10 MB/s Ethernet port on-board - For simultaneous LAN / IP data
and PCM voice needs
Affordable – The “per pair” pricing of the FT-512 is comparable to the “single
unit” of other data radios not designed for voice and PSTN integration.