Specification Sheet



Carl’sPlaceLLC|www.carlofet.com|[e-mail]

Carl’s Gray Rear Projection Film, Finished Edge Projector Screen
with Grommets, Translucent
Carl's Place is the internet's leading DIY resource for quality projector screen material, finished edge
screens and kits at a great low price!
This Finished Edge Rear Projection Film Screen is the perfect surface to use when the situation
does not allow projection equipment to be in front of the screen. The finished edges with grommets
make it easy to install on any truss system, DIY frame or Carl’s Kit. The translucent gray surface
works best with a bright projector (2,000+ lumens) and narrower viewing angle/audience seating
area. Gray Rear Projection Film Material is best for a wooden fixed frame where it will be stretched
tightly and evenly in all four directions (like a trampoline). It also works for our tension-mounted
Hanging & Standing Kits. Your DIY Gray Rear Projection Film Screen is a high-tech product which
features a natural and clear image and works best in a dark to low environment. You should project
onto the smooth side of your Gray Rear Projection Film. Why buy Gray Rear Projection Film? It's a
great way to hide your projection equipment; you have a narrow viewing angle and you only plan to
project from the back of your screen. Search ASIN B00JF7RHFU to buy Carl’s Black Ball Bungees now
(sold separately).
 Gray Rear Projection Screen Material with Finished Edges & Grommets Installed
 Great with any truss system, DIY frame or one of Carl’s Kits
 Translucent gray (not transparent/clear) which features a natural & clear image
 The image passes through the screen when the projection equipment is behind the screen
 Gray Rear Projection Film is a high-tech 100% PVC product
 Rear projection fabric works best with a bright projector (2,000+ lumens)
 Great for a narrower viewing angle/audience seating area
 Best in a dark to low light environment
 Indoor/Outdoor applications (Mildew Resistant)/Portable
 Tension-Mount/Stretch for best results (tight like a drum)
 The textured side faces the audience
 Gain— Not Applicable
 Shipping Weight/Dimensions next page
Finished Edge Projector Screens ship folded and cannot ship rolled. Remove your screen from
the box immediately upon receipt. Once installed and the proper tension has been applied
evenly all the way around the screen, the folds pull out nicely. Fold marks can be a good
indicator you have applied the proper amount of tension during installation. To store your
screen; make sure it is clean and dry and always fold it loosely, do not roll a finished edge
screen or you risk imprinting the screen with each grommet hole each time around the tube.