Use and Care Guide

United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
E-495
Conduit & Fittings — Carlon
®
PVC Elbows, Conduit & Fittings
Carlon
®
Masonry Pipe Clamps make installations faster and easier by
eliminating the use of bolts and anchors. The one-piece design features
an anchoring projection designed to push into a
5
⁄16" drill hole.
The clamps are used to securely support pipe/conduit and electrical
cables on concrete and masonry block, and unlike metallic clamps
Carlon
®
Masonry Clamps won’t rust or corrode.
Carlon
®
Masonry Pipe Clamps are available in sizes
1
⁄2" and
3
⁄4" and are
ideal for commercial applications such as schools, hospitals, airports,
condominiums, hotels, airports, office buildings and casinos.
Features
• One-piece design
• Material: Nylon PA6
• Color: Gray
• Flame resistance: V2
• Anchor length: 1.2" threaded
• Drill hole:
5
⁄16"
Carlon
®
Masonry Pipe Clamps
Using a
5
⁄16" masonry drill bit, drill a hole into
the concrete.
1
Tap clamp with hammer until fully inserted.
2
Hang desired conduit onto the clamp.
3
CAT. NO. SIZE (IN.) STD. CTN. STD. WT. (LBS.)
E977NDC-CTN
1
⁄2 12 1.2
(Equals 12 Bags of 5 Clamps)
E977NEC-CTN
3
⁄4 12 1.3
(Equals 12 Bags of 5 Clamps)
NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc.
Installation:
Note: Follow NEC
®
guidelines for conduit clamp spacing.
Straps, Clamps and Accessories