Product Description Instruction Manual

ManualsBrandsCarlon ManualsEquipmentMulti-Gard Fiberglass

MULTI-GARD

FIBERGLASS RACEWAY

www.carlonsales.com

General Description

Multi-Gard Fiberglass is a multi-cell raceway system for bridge crossing

applications consisting of 20' overall lengths of either standard wall, heavy wall

or bullet resistant 4" fiberglass outer shell with 3 x 1 1/2" or 4 x 1 1/4" nominal pre-

lubed innerducts preinstalled. In addition, fixed bends with "cutthrough" resistant

engineered plastic innerducts are available along with many other accessories

for terminating, cable pulling, and cable blowing.

Features

• Preinstalled silicone lined PVC innerducts reduce coefficient of friction for

easy cable pulling or jetting.

• Anti-reversing gaskets on coupling body allow easy push in hard to pull

out sealing system.

• Jettable using high-speed air blowing systems.

• Oring gasket at base of bell reduces risk of water entering system.

• Inward tapering holes on coupling body give quick and easy innerduct

alignment.

• Marked innerduct and marked hole on coupling body ensure proper

innerduct alignment.

• Couplings in standard and slip sleeve reduce waste.

• Transition adapters to allow transition between different outerducts.

• Deep bell provides strong joint.

• Internal spacers keep innerducts straight.

• Staging materials to job site is simplified.

• Standard Wall .070" provides basic mechanical and UV protection.

• Heavy Wall .090" provides enhanced mechanical protection where

physical abuse might be experienced.

• Bullet Resistant .250" provides heavy duty protection.

• Lightweight construction for easy handling.

Gross Automation (877) 268-3700 · www.carlonsales.com · sales@grossautomation.com

Summary of content (6 pages)

PAGE 1
MULTI-GARD® FIBERGLASS RACEWAY General Description Multi-Gard Fiberglass is a multi-cell raceway system for bridge crossing applications consisting of 20' overall lengths of either standard wall, heavy wall or bullet resistant 4" fiberglass outer shell with 3 x 1 1/2" or 4 x 1 1/4" nominal prelubed innerducts preinstalled. In addition, fixed bends with "cutthrough" resistant engineered plastic innerducts are available along with many other accessories for terminating, cable pulling, and cable blowing.
PAGE 2
MULTI-GARD® FIBERGLASS RACEWAY 20' Overall Length Fiberglass Multi-Cell with Bell Part No. MSSS4S020 MSSS3S020 MHSS4S020 MHSS3S020 MBSS4S020 MBSS3S020 Description 4-Cell Standard .070 3-Cell Standard .070 4-Cell 3-Cell Heavy Wall .090 4-Cell Bullet Res. .250 3-Cell Bullet Res. .250 Bell (A) Outerduct Innerduct Dim. Innerduct Dim. Pkg. Wt. per 100 ft. Dim. (B)Dim. O.D. I.D. Qty (lbs.) 4.31 4.14 1.31 1.19 1140' 240 4.31 4.14 1.66 1.50 1140' 253 4.39 4.18 1.31 1.19 1140' 338 4.
PAGE 3
MULTI-GARD® FIBERGLASS RACEWAY Fiberglass Multi-Cell Fixed Bends with Bell Multi-Gard fixed bends use the same coupling design as straight sections. All bends are provided with engineered plastic innerducts to avoid rope cut-through into adjacent innerducts. Part No. Pos. 1 M = Multi-Cell Description Pkg. Qty. Wt. Ea. M _ _ HN4S 4-cell 1.19 I.D. * * M _ _ HN3S 3-cell 1.50 I.D. * * Pos. 2 Pos. 3 (A) Outerduct Degree Outerduct 3 = 11 _ S = Standard 5 = 22 _ H = Heavy Wall 7 = 45 Pos.
PAGE 4
MULTI-GARD® FIBERGLASS RACEWAY Terminators Fiberglass Multi-Cell Termination kits allow for sealing inner and outerducts. Each kit contains innerduct sealing plugs with tie rope. Standard terminators allow for end terminations. Part No. Part No. 4-Cell 3-Cell MXT14 MXT13 Product Description Pkg. Qty. Wt. ea. Terminator 1 1.5 Outerduct Description Type Cells Pos. 2 Pos. 3 Pos. 4 Pos. 5 Pos.
PAGE 5
MULTI-GARD® FIBERGLASS RACEWAY Transition Adaptors Transition adapters allow different outerducts to be coupled together while maintaining same innerduct. (See PVC section for transitioning to PVC MultiGard.) Part No. Description Pkg. Qty Wt. ea. M _ A _ _ Transition Adapters Product Pos. 1 Outerduct Pos. 2 Pos. 3 * * Outerduct Cells Pos. 4 Pos. 5 B = F/G BR M = Multi-Cell H = F/G HW A = Adapter R = Galv. Steel M = F/G Std.
PAGE 6
MULTI-GARD® FIBERGLASS RACEWAY Expansion Joints Expansion Joints allow for thermal expansion and contraction of outerduct. Fiberglass expansion joints are recommended every 150 feet on bridge crossing applications. Part No. Pos. 1 Product Description Pkg. Qty. Wt. ea. M _ EC4 4-Cell 6" Stroke * * M _ EC3 3-Cell 6" Stroke * * Pos. 2 Outerduct Pos. 3 Pos. 4 Pos.5 Cells S = Standard H = Heavy Wall M = Multi-Cell B = Bullet Res.