Product Brochure

Cord Grips
P-10
Carflex
®
Liquidtight Flexible Tubing
Straight PG Hubs
Features:
• New threads on body prevent skipping, speed installation
• PG hub threads are steel conduit per DIN 40430
• Six sizes for cable, tubing, etc.: PG07, PG09, PG11, PG13.5,
PG16 and PG21
• All-nylon construction with TPE gland resists saltwater, weak
acids,
gasoline, alcohol, oil, grease and common solvents
• Suitable for NEMA Type 4 and 6 enclosures
• Locknuts are included
• Working temperatures: -22°F (-30ºC) to 212°F (100°C).
F
or short periods to 302°F (150°C)
• Protection Class IP68 per DIN 40050
up to 70 psi (5 bar) wa
ter pressure
B
E
C
D
A
Suggested
Clearance Hole
for Non-Threaded
Mounting
Straight NPT Hubs
Features:
• New threads on body prevent skipping, speed installation
• Four sizes for cable, tubing, etc. with diameters of
3
⁄8",
1
⁄2",
3
⁄4" and 1"
• All-nylon construction with TPE gland resists saltwater, weak acids,
gasoline,
alcohol, oil, grease and common solvents
• Suitable for NEMA Type 4 and 6 enclosures
• Locknuts are included
• Working temperatures: -22°F (-30°C) to 212°F (100°C).
F
or short periods to 302°F (150ºC)
• Protection Class IP68 per DIN 40050
up to 70 psi (5 bar) wa
ter pressure
ABCDE
DIAMETER OF WRENCHING
STRAIGHT STRAIGHT CABLE OR WIRE CLEARANCE MAX O.A. THREAD NUT WRENCHING
CAT. NO. CAT. NO. SIZE (IN.) STD. STD. ACCOMMODATED HOLE LENGTH LENGTH THICKNESS FLATS
BLACK GRAY (NPT) CTN. WT. (LBS.) IN. (MM) IN. (MM) IN. (MM) IN. (MM) IN. (MM) IN. (MM)
LH38 LH38G
3
⁄8 100 1.9 .181–.312 (4.6–7.9) .670 (17.0) 1.49 (37.8) .53 (13.5) .20 (5.1) .75 (19.1)
LH50 LH50G
1
⁄2 100 2.9 .170–.470 (4.3–11.9) .875 (22.2) 1.72 (43.7) .62 (15.7) .20 (5.1) .95 (24.1)
LH75 LH75G
3
⁄4 50 2.7 .450–.709 (11.4–18.0) 1.068 (27.1) 1.97 (50.0) .63 (16.0) .23 (5.8) 1.30 (33.0)
LH100 LH100G 1 25 2.6 .590–1.000 (15.0–25.4) 1.375 (35.0) 2.42 (61.5) .78 (19.8) .28 (7.1) 1.66 (42.2)
Carlon
®
recommends using the smallest maximum diameter fitting that will suit your application.
B
E
C
D
Suggested
Clearance Hole
for Non-Threaded
Mounting
A
E51579
LR93876
E51579
LR93876
ABCDE
DIAMETER OF WRENCHING
STRAIGHT CABLE OR WIRE CLEARANCE MAX O.A. THREAD NUT WRENCHING
CAT. NO. SIZE STD. STD. ACCOMMODATED HOLE LENGTH LENGTH THICKNESS FLATS
BLACK (PG) CTN. WT. (LBS.) IN. (MM) IN. (MM) IN. (MM) IN. (MM) IN. (MM) IN. (MM)
LH07 PG07 100 1.3 .114–.250 (2.9–6.4) .492 (12.5) 1.17 (29.7) .33 (8.4) .22 (5.6) .59 (15.0)
LH09 PG09 100 2.0 .181–.312 (4.6–7.9) .599 (15.2) 1.30 (33.0) .34 (8.6) .20 (5.1) .75 (19.1)
LH11 PG11 100 2.6 .230–.395 (5.8–10.0) .733 (18.6) 1.46 (37.1) .39 (9.9) .20 (5.1) .86 (21.8)
LH13 PG13.5 100 3.1 .170–.470 (4.3–11.9) .804 (20.4) 1.53 (38.9) .41 (10.4) .20 (5.1) .95 (24.1)
LH16 PG16 50 2.1 .230–.546 (5.8–13.9) .886 (22.5) 1.66 (42.2) .45 (11.4) .23 (5.8) 1.05 (26.7)
LH21 PG21 50 3.2 .450–.709 (11.4–18.0) 1.115 (28.3) 1.87 (47.5) .52 (13.2) .23 (5.8) 1.30 (33.0)
Carlon
®
recommends using the smallest maximum diameter fitting that will suit your application.