Cut Sheet

w w w . c a r l o n . c o m
157
SCMS – Accessories
SC34CC SC12CC SC14CC
Resi-Gard
®
Solvent Cement
Resi-Gard
®
Cutters
Cable Clips
Conduit Clamps
For clean cuts
of conduit
1
/2"
through 2".
For fast, smooth field
cuts of
1
/2" through 1"
innerduct.
Small Cutter
Large Cutter
NOTE: Each clamp requires 2 screws, 2 nuts, and/or 2 bolts
Pre-installed nails provide fast and easy installation for either a
single cable, 2-3 cables, or 1 bundled cable.
Designed to secure Resi-Gard raceway or bundled cable.
Ideal for fast, smooth field cuts for up to 1" diameter Resi-Gard nonmetallic flexible
raceway. The large PVC Cutter is ideal for cuts up to 2" diameter nonmetallic rigid and
flexible raceway.
Part No. Size
Std.
Ctn. Qty.
CC120B 8" 10
Part No. Size
Std.
Ctn. Qty.
CC122 17
1
/2" 1
Size Part No.
Standard
Bag Quantity
Std. Ctn.
Qty.
Std. Ctn.
Wt. (lbs.)
1
/4" SC14CC 1 ea. 10 Bags of 100 2.23
1
/2" SC12CC 1 ea. 10 Bags of 25 2.31
3
/4" SC34CC 1 ea. 20 Bags of 10 2.96
(Equals one bag
of 100 Clips)
(Equals one bag
of 25 Clips)
(Equals one bag
of 10 Clips)
Size Part No.
Standard
Bag Quantity
Std. Ctn.
Qty.
Std. Ctn.
Wt. (lbs.)
3
/4" SCE977EC 1 ea. 20 Bags of 5 1.5
1" SCE977FC 1 ea. 12 Bags of 5 1.3
1
1
/4" SCE977GC 1 ea. 8 Bags of 5 1.1
1
1
/2" SCE977HC 1 ea. 6 Bags of 5 1.0
2" SCE977JC 1 ea. 6 Bags of 5 1.5
(Equals one bag
of 5 Clamps
(Equals one bag
of 5 Clamps
(Equals one bag
of 5 Clamps
(Equals one bag
of 5 Clamps
(Equals one bag
of 5 Clamps
Meets ASTM D-2564
Recommended pipe
application and sizes
Set-up time
(Evaporation Rate)
Recommended
installation
temperature
Lap Shear
@ 73˚F
Viscosity at
75˚ as
manufactured
For use with Resi-Gard
®
, Riser-Gard
®
,
P&C Flex
®
, and Carlon PVC fittings.
Up through 6" diameter.
10˚–30˚F Use extra caution
30˚–50˚F 5-6 minutes
50˚–70˚F 3-4 minutes
70˚–90˚F 1-2 minutes
40˚ to 100˚F 2 hrs. 350 psi
16 hrs. 800 psi
72 hrs. 1,500 psi
500-900 cps
Part No Size Applicator Description Ctn. Qty. Ctn. Wt. (lbs.)
VC9963SC Pint Brush Resi-Gard
®
Solvent Cement Clear 24 28.0