Specifications

SMS setting
Up to 8 different SMS can be sent from the instrument to up to 5 phone numbers in
case of alarm activation or deactivation.
Real-time variables
The real-time function allows the display of all the instantaneous
variables measured by the instrument and of the total and partial
energy, gas and water.
Data download
It is possible to manually or automatically download the logged data from up to
100 remote networks composed by maximum 10 WM4 96 or 255 PQT 90 each.
The time period between two consecutive automatic downloads is fully
configurable from 1 day to 1 month. The downloaded data are available for the
users in a TXT format so to be used in an Excel spread-sheet for a full analysis.
Instrument configuration
All the working parameters of the instrument can be uploaded
according to its module composition and to the system to be
monitored.
Wm4Soft Remote and PqtSoft Remote allow to configure the instrument, to choose the SMS alarms and to select the
8 variables to be logged in the 2Mb memory. A real-time table showing all the variables is available too. The PC where the
software runs can be connected to the instrument by RS232, RS485 (also multi-drop), analogue or GSM modems.
Wm4Soft Network and PqtSoft Network allow the manual or automatic data download from the 2Mb memory module
plugged in the instrument and the selection of the alarm SMS. A real-time table showing all the variables is available too.
The PC where the software runs can be connected to the instrument by RS232, RS485 (also multi-drop), analogue or GSM
modems. A phone book is available to call up to 100 instruments located in different places.
43