Specifications

20
Hardware
Functions
In-Out
Performances
The best to suit your needs!
Modular Energy Meter EM3 DIN
90x162.5x63mm (9-DIN modules)
Mechanical
YES
N.A.
6+1 DGT
Class 2 (EN61036)
Class 3 (EN61268)
≤250ppm/°C
N.A.
Unbalanced: 3-phase
120/208VAC, 230/400VAC, 380/660VAC
Ib: 20A, Imax: 100AAC
N.A.
N.A.
TRMS method
kWh or kvarh (selectable)
N.A.
2 (open collector type)
N.A.
N.A.
N.A.
N.A.
Start-up current: 80mAAC
Self power supply, 115VAC, 230VAC
CE
IP40
Housing (H x W x D)
Display type
Variables on display
Instantaneous variables
Energy variables
Accuracy
Temperature drift
Refresh Rate
System type
Voltage inputs (Un)
Current inputs (Ib/Imax)
Digital inputs
Primary of CT/VT
Measurements:
Variables
Harmonic distortion
Outputs: Pulse
Alarm
Analogue
Serial
Digital filter
Other characteristics
Power supply
Approvals
Protection degree
• Easy installation avoiding any programming set-up.
• Self power supply making the installation easier and
quicker.
• Direct connection up to 100A allowing the user to save
the costs of external current transformers and of
relevant wiring.
• Dual pulse output transmitting to a PLC or other
equipment the active and reactive energy
simultaneously.
• Wall mounting avoiding any other protection enclosure.
Comm
100A
EM3 DIN
EM3 DIN is an energy meter that has been developed to
meet the requirements of those applications where a very
simple and reliable instrument is needed.
The main advantages
• Electromechanical display allowing the user to read the
consumed energy even when the load or the meter is not
power supplied.
direct connection
available.
100A