Specifications

EM24 DIN, EM3 DIN, EM4 DIN, WM22 DIN
65A and 100A available
Connections for cables
with cross-section area
from 6 to 35mm
2
instead
of passing-by types
assuring a “contactor
type” wiring and
connection protection.
Modular DC energy analyzer with
built-in 6 digit display. The
analyzer is the combination of
two modules where VMU-E is
the metering unit while VMU-X
is the universal power supply
unit, according to the model
can become also a digital
output or an RS485 port.
WM22 DIN
Example of variables
displayed with serial
communication
diagnostics: r.t (Rx/Tx).
Example of 7 1/2 digit
energy displaying.
WM5 96
Software as programming tools
for CPT, PQT, WM4, WM5, WM14, EM21, EM24 and EM26
Easy infrared communication
Front optical port for an
easy and fast
communication with a PC
or a laptop without the
need to open the switch-
gear where the instrument is installed, granting the
highest safety level for the user. Availability of
additional functions through the optical port like
the instrument programming, the measured data
and logged events reading.
EM21 72D
One product, 3 different installation modes
Detachable display to carry out up to 3 installation
modes from the same instrument: DIN-rail, panel
mounting or transducer.
Tools allowing the user to
configure the instruments
using the PC and the
RS485, the RS232, or the
optical (WM5 and PQT
H only) ports, making the
programming job easier
and faster.
15
VMU-E, VMU-X
All information available at a glance
3
Panel
Mounting
Transducer
DIN-rail mounting
1+1=