Instruction manual

▲
▲
8
12
Index
Energy meter pages
310
■ How the F key changes function depending on
the display page
❑ Pages from "00" to "13" (04 in single phase mode)
Displaying of the variables
key enabled if the alarm latch function is activated,
access to the reset of the latch alarms.
To reset the latch alarm press the key; after that a
message will appear "WILL YOU RESET THE LATCH
ALARMS?": if you choose you will enable the reset
procedure, if you choose there won’t be any reset. The
reset of the latch alarm is only available if the alarm event
is finished.
❑ Pages from "14" to "18" (from 05 to 09 in single phase
mode). Displaying of the MIN and MAX values
The key is active, that means that you have access to the
reset function of the “MIN” and “MAX” values. To reset the
"MIN/MAX" recording, proceed as follows: enter the
function by pressing the key, after that a message will
appear: "WILL YOU RESET MIN/MAX VALUES, WILL
YOU CONTINUE?" If you choose there won’t be any
reset, if you choose the reset will not be made. The
(moves from left to right) and (moves from right to left)
keys allow you to select the value that you want to reset;
to confirm the reset press the key. To exit the function
press the key again.
7
■ How to scroll the various pages
To scroll the various pages, use the and keys.
Pressing the key in any one of the display pages,
you access to the programming phase. The key,
on the contrary, has various functions depending on
the selected page.
Displaying of the variables
Gross Automation [phone] · www.carlogavazzisales.com · [e-mail]