Instruction manual

5
▲
▲
To begin with
Displaying of the harmonic analysis
9
6
Index
2
Go to the page where the subject written
on the bottom of the current page starts.
This symbol indicates a particularly important
subject or information.
This symbol indicates that more details are
given on the current subject.
We suggest you to keep the original pack-
ing in case it is necessary to return the
instrument to our Technical Service De-
partment. In order to achieve the best results
with your instrument, we recommend you
to read this instruction manual carefully.
■ Main programming parameters
• Programming of the password
• Selection of the electrical system
• Programming of the CT ratio (up to 30,000 A)
• Programming of the VT ratio (up to 600kV)
• Selection of the variables for the MIN / MAX detection
• Programming of the calculation of the integration time period
• Tariff management
• Harmonic analysis enabling
• Clock adjustment (if present)
• Programming of the pulse output (if present)
• Programming of the serial and analogue outputs (if present)
• Programming of the digital filter.
▲
Gross Automation [phone] · www.carlogavazzisales.com · [e-mail]