User guide

4-14
Damper actuators
http://products.ecc.emea.honeywell.com/europe
2
3
4
5
6
7
8
9
10
11
12
13
14
Direct-coupled actuator with self-centering shaft adapter.
For air dampers, air handlers, ventilation flaps, louvers and VAV-units.
For damper area of 4 square meters
For damper area of 6 square meters
Optional accessories
Damper actuator 20/34 Nm, SmartAct
Protection class IP54
Position indication rotational angle scales 0..90
o
, 90..0
o
End switch function/capacity SPDT switch 230V, 5 (3) A for models with end switch
Shaft mounting for round shafts 10..27 mm; square shafts 10..18 mm
Manual operation yes
Additional description • Rotation direction selectable by switch.
• When power is removed, the actuator remains in position.
• Removable wiring box.
• Actuator supplied with complete package mounting parts.
• For modulating control models: Control input signal can be voltage
or current.
• For modulating control models: Autoadapt dipswitch. With this
function the full span of the control input signal will be used for the
applicable angle or rotation.
Power
supply
Control input
signal
Built in
rotation
limiter
End
switches
Position
feedback
Runtime Torque Damper
area
Type
Vac; VA s Nm m
2
24; 6 2/3-pt • optional – 110 20 4 N2024
24; 6 2/3-pt • 2 – 110 20 4 N2024-SW2
230; 6 2/3-pt • optional – 110 20 4 N20230
230; 6 2/3-pt • 2 – 110 20 4 N20230-SW2
24; 6 0/2..10V= • optional 0/2..10V= 95 20 4 N20010
24; 6 0/2..10V= • 2 0/2..10V= 95 20 4 N20010-SW2
Power
supply
Control input
signal
Built in
rotation
limiter
End
switches
Position
feedback
Runtime Torque Damper
area
Type
Vac; VA s Nm m
2
24; 7 2/3-pt – optional – 110 34 6 N3424
230; 7 2/3-pt – optional – 110 34 6 N34230
24; 8 0/2..10V= – optional 0/2..10V= 95 34 6 N34010
End switch kit, with 2 SPDT freely adjustable end-switches
SW2