User guide

2-8
CentraLine Controllers
http://products.ecc.emea.honeywell.com/europe
2
3
4
5
6
7
8
9
10
11
12
13
14
CentraLine controller with relay outputs, for HVAC applications. The controller can be applied for
stand-alone operation, dial-up and in network systems.
TIGER controller; 8 AI, 14 DI, 4 AO, 12 DO (3 SPDT, 9 SPST)
Additional products for TIGER controllers
Additional products for CLTG38L01
COACH for selection of control software
HVAC controller with configurable applications, and relay outputs, TIGER
Control software control software embedded, with hundreds of different selectable
applications and parameter settings
Hardware inputs • Analog Inputs (AI) for NTC20k sensors, 0..10 V, 0/4..20 mA
active sensors (apply GT4 signal separator!) or slow switching
dry contact
• Digital Inputs (DI) for potential free contacts, 24 Vdc or 24 Vac
Hardware outputs • Analogue Outputs (AO) 0..10V=
• Digital Outputs (DO) relay contact SPDT or SPST
Management applications ARENA / RANGER
Stand-alone operation yes
Bus system description LonWorks(R) bus for data exchange with other TIGER, or
PANTHER controllers, and building automation management
systems with ARENA, or alarm monitoring with RANGER
Transceiver type LonWorks(R) FTT10A
Mounting DIN rail
Protection class IP30
Type of terminals screw terminals with terminal block
Memory back-up goldcap capacitor for 72 hours buffer
Power supply 24 Vac; 15 VA
LonWorks(R) connection directly connectable
Additional description Use COACH software from CentraLine to select the right control
software for the required installation.
Product description Type
TIGER controller with LON CLTG38L01
TIGER controller with LON + operator panel CLTG38L11
I/O expansion board, 8 AI, 14 DI, 4 AO, 12 DO (3 SPDT, 9 SPST) with DIN rail
mounting clip and flat cable (350 mm). Max. 1 board/controller.
CLTG38EXPN01
External Operator panel with cable (5 m); wall/door mounting
CLMMI00N22
CentraLine Touch operator interface
CLMMI00N31
Connection cable between CL-Touch/PC and PANTHER/TIGER
XW585
LON connection and termination module
XAL-TERM
Signal separator
GT4
External operator panel with door mounting kit and flat cable (1.5 m)
CLTG00MMIN01
COACH for End user
CLCH2EL1
COACH for Expert End user
CLCH2EL2
COACH for Partner
CLCH2EL3
COACH for Expert Partner
CLCH2EL4