User guide

26-6
Solenoid Valves, component tested
http://products.ecc.emea.honeywell.com/europe
16
17
18
19
20
21
22
23
24
25
26
27
28
16
The 2/2-way valves of the K-series can be used for all gases according to DVGW-data sheet G 260,
for liquid gas in liquid phase (up to DN25) and for fuel oil. No minimum differential pressure is
necessary.
Socket connection
Flange connection
Accessories
Solenoid valves for gas, liquid gas/fuel (K)
Valve application liquid gas
Materials Casing: Bronze Rg 5 to DIN1705 Internal parts: Brass
(CuZn40Pb) and corrosion-resistant steel Piston seal: Buna
rubber (NBR) Nozzle seal: Buna rubber (NBR) Static seal: Buna
rubber (NBR)
Media temp. -15 ... 60
o
C
Ambient temperature -15 ... 60
o
C
Operating mode normally closed
Power supply 230V 50Hz
Certificates • CE-0085AN0072 according to DIN EN 161, DIN 3394, P.1
• CE-0085AN0074 according to DIN EN 161
• 5S038/02 according to DIN EN 264
• 5S039/02 according to DIN EN 264
• 5SO40/02 according to DIN EN 264
• CE-0035BN0022 according to PED
• CE-0035BN0023 according to PED
• CE-0035BN0024 according to PED
Additional description The valves must be actuated approx. 5 - 10 times per month to
prevent possible sticking of the piston. Other supply voltage on
request.
DN size Kvs value Static pressure Working range Connections Class Type
mm bar
15 4 PN40 0 ... 4 G1/2 B K15G31M
20 4,8 PN40 0 ... 4 G3/4 B K20G31M
DN size Kvs value Static pressure Working range Connections Class Type
mm bar
15 4 PN40 0 ... 25 flange B K15G31F
20 4,8 PN40 0 ... 25 flange B K20G31F
25 10 PN40 0 ... 25 flange B K25G31F
32 13 PN40 0 ... 25 flange B K32G31F
40 34 PN25 0 ... 20 flange C K40G31F
50 40 PN25 0 ... 20 flange C K50G31F
Rectifier / Plug
GS