User guide

23-6
Standard Thermostats
http://products.ecc.emea.honeywell.com/europe
16
17
18
19
20
21
22
23
24
25
26
27
28
16
The sensor cartridge at the end of the capillary tube is the actual active (temperature sensitive) part of
the sensor. Changes in temperature on the capillary tube have no effect on the switching point.
Pressuretight installation of the sensor in pressure vessels of all kinds is possible with the aid of
immersion tubes.
Immersion wells
Immersion tubes NPT
More Accessories
Capillary tube thermostat with sensing bulb (TAM)
Electrical connection Plug DIN 43650
Protection class IP54
Housing material die-cast metal GD Al Si 12 to DIN 1725
Ambient temperature -15 ... 70
o
C
Switch function/capacity SPDT 250 Vac, 8(5) A
Capillary tube length 1,5 m
Optional functions add the type numbers below to the listed type numbers for extra
functionality as described
• -213: gold-plated contacts, switching capacity: max. 24 Vdc, 100
mA, min. 5 Vdc, 2 mA. And others not available with adjustable
switching difference.
• -301: terminal connection housing, IP65
• -351: protection class IP65 and switching housing with surface
protection (chemical version)
• -513: gold-plated contacts, IP65, capacity: max. 24 Vdc,
100 mA, min. 5 Vdc, 2 mA
Thermostat application capillary tube thermostat
Temp. setpoint range Differential fixed Max. perm. temp. at sensor Type
o
C K
o
C
-20 ... 20 1,5 110 TAM022
10 ... 50 1,5 110 TAM150
40 ... 90 2 125 TAM490
80 ... 130 2 150 TAM813
Red brass well G1/2" PN25, immersion/total length 135/151 mm
R1/MS
Stainless steel well G1/2" PN63, immersion/total length 135/151 mm
R1/Nst
Red brass well G1/2" PN25, immersion/total length 220/236 mm
R2/MS
Stainless steel well G1/2" PN63, immersion/total length 220/236 mm
R2/Nst
Red brass well G1/2" PN25, immersion/total length 500/516 mm
R3/MS
Capillary tube bushing with 3 mm capillary tube screw in thread G1/2, not pressure-
tight
R4
Capillary tube bushing, rubber plug for 3 mm capillary tube, bore diameter 10 mm,
not pressure-tight
R5
Red brass well G1/2" NPT PN25, immersion/total length 135/151 mm
RN1/MS
Stainless steel well G1/2" NPT PN63, immersion/total length 135/151 mm
RN1/NST
Red brass well G1/2" NPT PN25, immersion/total length 220/236 mm
RN2/MS
Stainless steel well G1/2" NPT PN63, immersion/total length 220/236 mm
RN2/NST
Wall bracket for fixing the sensor cartridge
H2
Sealing
P2
Heat conducting compound
WLP1