User guide

22-7
Control Valves, industrial
16
17
18
19
20
21
22
24
23
25
26
27
28
Spare Parts
Accessories
Type MV300 magnetic solenoid valves are mainly used as shutoff valves. They are controlled by the
integral magnetic solenoid operated valve. Their compact design makes them ideally suited where
space is limited, for example in ducts. Within the scope of their specification they can be used on
industrial and commercial applications.
Flanges, PN 16, ISO 2084, Magnetic solenoid pilot valve 230 V/50 Hz closed when electrical supply
off; PN 25, ISO 2441 on request
Seal Set for DN 50
0903750
Seal Set for DN 65
0903751
Seal Set for DN 80
0903752
Seal Set for DN 100
0903753
Seal Set for DN 150
0903754
Seal Set for DN 200
0903755
Seal Set for DN 250
0903756
Seal Set for DN 300
0903757
Seal Set for DN 350
0903758
Seal Set for DN 400
0903759
Seal Set for DN 450
0903760
Pilot float valve, level switching differential 5 - 160 cm, for all sizes
70-550
Pilot float valve, level switching differential 5 - 40 cm, for all sizes
70-610
Pilot float valve, level switching differential 5 - 160 cm, for all sizes
70-550
Pilot float valve, level switching differential 5 - 40 cm, for all sizes
70-610
Magnetic solenoid valve, MV300
Media Water
Body material spherulitic cast iron GGG40
Body finishing powder coating
Port connection type flanges
Max. media temperature 80
o
C
Static pressure PN16
Minimum inlet pressure 0,7 bar
Additional description • High flow capacity
• Fitting of impulse link pipework is not necessary
• Powder coated inside and outside - Powder used is
physiologically and toxicologically safe
• Integral control circuit and ball valves
DN size Flow capacity Kvs Type
mm
50 43 MV300-50A
65 43 MV300-65A
80 103 MV300-80A
100 167 MV300-100A
150 407 MV300-150A
200 676 MV300-200A
250 1160 MV300-250A
300 1600 MV300-300A
350 1600 MV300-350A
400 3300 MV300-400A
450 3300 MV300-450A