User guide

22-4
Control Valves, industrial
http://products.ecc.emea.honeywell.com/europe
16
17
18
19
20
21
22
23
24
25
26
27
28
16
Pressure regulators of this type protect downstream installations against excessive supply pressure.
Pressure regulators are used when the capacity of direct controlled pressure reducing valves are
insufficient. Their compact construction makes them particularly suitable for installation in limited
spaces, for example in ducts. By using a pressure regulator, pressurization damage is avoided and
water consumption reduced. The set pressure is also maintained constant, even when there is wide
inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level
minimizes flow noise in the installation.
Flanges, PN 16, ISO 2084
Flanges, PN 25, ISO 2084
Pressure regulator, DR300
Media Water
Body material spherulitic cast iron GGG40
Body finishing powder coating
Port connection type flanges
Max. media temperature 80
o
C
Static pressure PN16
Minimum inlet pressure 0,7 bar
Pressure setpoint range 1 ... 12 bar
Additional description • High flow capacity
• High control accuracy
• Powder coated inside and outside - Powder used is
physiologically and toxicologically safe
• Integral control circuit and ball valves
• No external energy required for operation
DN size Flow capacity Kvs Type
mm
50 43 DR300-50A
65 43 DR300-65A
80 103 DR300-80A
100 167 DR300-100A
150 407 DR300-150A
200 676 DR300-200A
250 1160 DR300-250A
300 1600 DR300-300A
350 1600 DR300-350A
400 3300 DR300-400A
450 3300 DR300-450A
DN size Flow capacity Kvs Type
mm
50 43 DR300-50B
65 43 DR300-65B
80 103 DR300-80B
100 167 DR300-100B
150 407 DR300-150B
200 676 DR300-200B
250 1160 DR300-250B
300 1600 DR300-300B
350 1600 DR300-350B
400 3300 DR300-400B
450 3300 DR300-450B