User guide

19-34
Filter Combinations
http://products.ecc.emea.honeywell.com/europe
16
17
18
19
20
21
22
23
24
25
26
27
28
16
Accessories
Spare Parts
The FKN76CS filter combinations comprise reverse rinsing filter and pressure reducing valve in one
appliance. They ensure a continuous supply of filtered water. The fine filter stops the ingress of foreign
bodies, for example rust particles, strands of hemp and grains of sand. The pressure reducing valve
prevents pressure damage and reduces water consumption. The integrated appliances correspond to
the requirements of the current DIN/DVGW specification. Features of the individual components also
apply for the combination unit. FKN76CS filter combinations are especially suited for the retrofitting
and modernisation of existing water supply systems in buildings where an existing filter is to be
repalaced. The existing connectors can be reused. Where connections dimensions are different, an
adapter can be used.
Automatic reverse rinsing actuator for automatic filter cleaning, 230 V, 50/60 Hz,
10 W, IP 55, with electrical plug
Z11S-A
Automatic reverse rinsing actuator for automatic filter cleaning, 24 V, 50/60 Hz,
10 W, IP 55, without electrical plug
Z11S-B
Red bronze filter bowl for temperatures up to 70
o
C and up to 25 bar operating
pressure
FT09RS-1A
Intermediate connector for conversion of the fine filters with rotatable connector
pieces (1 1/4" and 1 1/2") into retrofit FKN76CS filter combinations (Converts 63 mm
hole centres to 45 mm hole centres)
ZA76C
Inlet check valve. Connection size 3/4"
RV277-3/4A
Inlet check valve. Connection size 1"
RV277-1A
Inlet check valve. Connection size 11/4"
RV277-11/4A
Threaded male connection, connection size 3/4"
VST06-3/4A
Threaded male connection, connection size 1"
VST06-1A
Threaded male connection, connection size 11/4"
VST06-11/4A
Solder union connection, connection size 3/4"
VST06-3/4B
Solder union connection, connection size 1"
VST06-1B
Solder union connection, connection size 11/4"
VST06-11/4B
Filter insert complete. Available with filter meshes 100 micron, for filters with Double
Spin Technology
AF11DS-1A
Pressure gauge with housing diameter 50 mm, connection thread G 1/4,
range 0 - 16 bar
M07M-A16
Filter insert complete for filters with double spin technology, filter mesh size
100 micron
AF11DS-1A
Valve insert complete (without filter)
D06FA-1A
Clear filter bowl complete
KF11S-1A
Ball valve complete
KH11S-1A
Drain connection
AA76-1/2A
Double ring wrench for removing filter bowl and spring bonnet
ZR10K-1
Retrofit reverse rinsing filter combination for connector flange, FKN76CS
Approvals DVGW-approval requested
Media Water
Body material brass, dezincification resistant
Spring bonnet material synthetic material
Port diameter 1 inch
DN size 25 mm
Max. media temperature 40
o
C
Static pressure PN16