User guide

19-31
Filter Combinations
16
17
18
19
20
21
22
24
23
25
26
27
28
Accessories
Spare Parts
Double ring wrench for removal of spring bonnet and filter bowl
ZR10K-3/4
Automatic reverse rinsing actuator for automatic filter cleaning, 230 V, 50/60 Hz,
10 W, IP 55, with electrical plug
Z11S-A
Automatic reverse rinsing actuator for automatic filter cleaning, 24 V, 50/60 Hz,
10 W, IP 55, without electrical plug
Z11S-B
Inlet check valve, connection size 3/4"
RV277-3/4A
Inlet check valve, connection size 1"
RV277-1A
Inlet check valve, connection size 11/4"
RV277-11/4A
Connector piece for conversion of the fine filters with rotatable connector pieces
(1 1/4" and 1 1/2") into retrofit filter combinations (Converts 63 mm hole centres to
45 mm hole centres)
ZA76C
Threaded male connection, connection size 3/4"
VST06-3/4A
Threaded male connection, connection size 1"
VST06-1A
Threaded male connection, connection size 11/4"
VST06-11/4A
Soldered union connection, connection size 3/4"
VST06-3/4B
Soldered union connection, connection size 1"
VST06-1B
Soldered union connection, connection size 11/4"
VST06-11/4B
Pressure gauge with housing diameter 50 mm, connection thread G 1/4,
range 0 - 16 bar
M07M-A16
Valve insert complete (without filter)
D06FA-1B
Filter insert complete, filter mesh size 100 micron
AF74-1A
Filter insert complete, filter mesh size 50 micron
AF74-1C
Filter insert complete, filter mesh size 200 micron
AF74-1D
Clear filter bowl complete
KF74-1A
Double ring wrench for removing filter bowl
ZR10K-3/4