User guide

19-19
Filters
16
17
18
19
20
21
22
24
23
25
26
27
28
For filters and filtercombinations HS10S, F76CS, FK76CS, FKN76CS, FN76CS, F74C, FK74C,
FKN74C, FN74C and FN09S
The Z74S automatic reverse rinsing actuator provides fully automatic cleaning for all Honeywell
Braukmann reverse rinsing filters, filter combinations and water supply units with bayonet connection.
A bayonet connection enables fitting the Z74S without tools. The reverse rinsing interval is set
permanently to 45 days. The Z74S automatic reverse rinsing actuator has a safety function which
prevents the ball valve from opening when the battery voltage is too low and notifies this through an
acoustic signal for approx. 2 days.
Use reverse rinsing actuator Z74S for filters and filtercombinations HS10S, F76CS, FK76CS,
FKN76CS, FN76CS, F74C, FK74C, FKN74C, FN74C and FN09S.
With bayonet connection
Product description Type
230 V, 50/60 Hz, 10 W, with moulded Schuko electrical plug Z11S-A
24 V, 50/60 Hz, 10 W, without electrical plug Z11S-B
Reverse rinsing actuator for fully automatic filter cleaning, Z74S
Approvals CE
Media Water
Body material synthetic material
Max. media temperature 40
o
C
Battery life Appr. 1 years
Additional description Three LR6-1.5 V-Mignon/AA size alkali-manganese batteries
(Batteries are not supplied with the appliance)
• Bayonet connection enables fitting without tools
• With locking mechanism which prevents the ball valve from
opening, if the battery voltage is too low to carry out the closing
• Set during manufacture to 45 day interval
• Battery operation
• Manufactured with integral electrical suppression
Type
Z74S-A