User guide

19-6
Filters
http://products.ecc.emea.honeywell.com/europe
16
17
18
19
20
21
22
23
24
25
26
27
28
16
FN76CS reverse rinsing filters ensure a continuous supply of filtered water. The fine filter prevents the
ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand. The
appliances correspond to the requirements of current DIN/DVGW specifications. FN76CS fine filters
are especially suitable for retrofitting to, or upgrading of existing water systems in which an existing
filter is to be replaced. The existing connectors are then reused. Where connection sizes are different,
an adapter connector can be used.
Filter mesh size 100 micron
Retrofit reverse rinsing fine filter for connection flange, FN76CS
Approvals DVGW-approval requested
Media Water
Body material brass, dezincification resistant
Port diameter 1 inch
DN size 25 mm
Max. media temperature 40
o
C
Static pressure PN16
Flow capacity Kvs 8,7
Integral filter 100 micron
Transparant strainer
chamber
yes
Reverse rinsing with
filtered water
yes
Mounting position horizontal or vertical
Additional description • Double Spin Technology - Cartridge with external rotor
enabling simultaneous cleaning in lower and upper filter areas,
visual function check possible
• Filtered water supplied even during reverse rinsing
• Patented reverse rinsing system - fast and thorough cleaning
of the filter with small amount of water
• Memory ring indicates when the next manual reverse rinsing is
due
• Automatic reverse rinsing actuator can be retrofitted using
bayonet connector
• Large filter surface
Type
FN76CS-1A