User guide

19-2
Filters
http://products.ecc.emea.honeywell.com/europe
16
17
18
19
20
21
22
23
24
25
26
27
28
16
Filters
F76S reverse rinsing filters ensure a continuous supply of filtered water. The fine filter prevents the
ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand. The
appliances correspond to the requirements of current DIN/DVGW specifications.
Threaded male connections, filter mesh size 100 micron
Threaded male connections, red-bronze filter bowl, filter mesh size 100 micron
Without connections, filter mesh size 100 micron, DN is based on connection size of tailpiece
Reverse rinsing fine filter, F76S
Approvals DIN/DVGW-approved
Media Water
Body material brass, dezincification resistant
Integral filter 100 micron
Reverse rinsing with
filtered water
yes
Mounting position horizontal
Additional description • Double Spin Technology for connection sizes 1/2" to 11/4" -
Cartridge with external rotor enabling simultaneous cleaning in
lower and upper filter areas, visual function check possible
• Filtered water supplied even during reverse rinsing
• Patented reverse rinsing system - fast and thorough cleaning
of the filter with small amount of water
• Memory ring indicates when the next manual reverse rinsing is
due
• Automatic reverse rinsing actuator can be retrofitted using
bayonet connector
• Large filter surface
Port connection type Port
diameter
DN size Max. media
temperature
Static
pressure
Flow capacity
Kvs
Transparant strainer
chamber
Type
inch mm
o
C
external threads 1/2 15 40 PN16 6,9 • F76S-1/2AA
external threads 3/4 20 40 PN16 9 • F76S-3/4AA
external threads 1 25 40 PN16 12 • F76S-1AA
external threads 1 1/4 32 40 PN16 15 • F76S-11/4AA
external threads 1 1/2 40 40 PN16 22,4 • F76S-11/2AA
external threads 2 50 40 PN16 25,7 • F76S-2AA
Port connection type Port
diameter
DN size Max. media
temperature
Static
pressure
Flow capacity
Kvs
Transparant strainer
chamber
Type
inch mm
o
C
external threads 1/2 15 70 PN25 6,9 – F76S-1/2AAM
external threads 3/4 20 70 PN25 9 – F76S-3/4AAM
external threads 1 25 70 PN25 12 – F76S-1AAM
external threads 1 1/4 32 70 PN25 15 – F76S-11/4AAM
external threads 1 1/2 40 70 PN25 22,4 – F76S-11/2AAM
external threads 2 50 70 PN25 25,7 – F76S-2AAM
Port connection type Port
diameter
DN size Max. media
temperature
Static
pressure
Flow capacity
Kvs
Transparant strainer
chamber
Type
inch mm
o
C
– 3/4 20 40 PN16 9 • F76S-3/4EA
– 1 25 40 PN16 12 • F76S-1EA
–1 1/43240PN1615 • F76S-11/4EA
–1 1/2 40 40PN16 22,4 • F76S-11/2EA
– 2 50 40 PN16 25,7 • F76S-2EA