User guide

18-10
Pressure Reducing Valves
http://products.ecc.emea.honeywell.com/europe
16
17
18
19
20
21
22
23
24
25
26
27
28
16
Pressure reducing valves of this type protect household water installations against excessive pressure
from the supply. They can also be used for industrial or commercial applications within the range of
their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water
consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet
pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level
minimizes flow noise in the installation.
With threaded male connections, clear filter bowl
With threaded male connections, stainless steel filter bowl
Stainless steel pressure reducing valve with setpoint scale, D06FI
Approvals DVGW approved
• Up to size 11/4" approved for low noise, Group 1 without
limitations
Media Water, compressed air and nitrogen in consideration of valid
standards (e.g. DIN EN 12502)
Body material stainless steel
Spring bonnet material synthetic material
Port connection type external threads
Integral filter 0,16 mm
Pressure setpoint range 1,5 ... 6 bar
Setpoint scale yes
Balanced seat design yes
Additional description Outlet pressure preset to 3 bar
• The outlet pressure is set by turning the adjustment knob
• The set pressure is directly indicated on the set point scale
• The adjustment spring is not in contact with the potable water
• The valve insert is of high quality synthetic material and can be
fully exchanged
• Integral fine filter
• Also available without fittings
• Inlet pressure balancing - fluctuating inlet pressure does not
influence outlet pressure
• Light weight
• Meets KTW recommendations for potable water
Port diameter DN size Max. media
temperature
Static pressure Flow capacity Kvs Transparant
strainer chamber
Type
inch mm
o
C
R 1/21540PN162,4 • D06FI-1/2A
R 3/42040PN163,1 • D06FI-3/4A
R 12540PN165,8 • D06FI-1A
R 1 1/4 32 40 PN16 5,9 • D06FI-11/4A
R 1 1/2 40 40 PN16 12,6 • D06FI-11/2A
R 25040PN1612 • D06FI-2A
Port diameter DN size Max. media
temperature
Static pressure Flow capacity Kvs Transparant
strainer chamber
Type
inch mm
o
C
R 1/21570PN252,4 – D06FI-1/2B
R 3/42070PN253,1 – D06FI-3/4B
R 12570PN255,8 – D06FI-1B
R 1 1/4 32 70 PN25 5,9 – D06FI-11/4B
R 1 1/2 40 70 PN25 12,6 – D06FI-11/2B
R 25070PN2512 – D06FI-2B