User guide

14-4
Balancing Valves
http://products.ecc.emea.honeywell.com/europe
2
3
4
5
6
7
8
9
10
11
12
13
14
Accessories
Diaphragm unit for upgrade of V5010 Kombi-3-plus BLUE and V5032 Kombi-2-plus valves to
automatic balancing valves. Unit is retrofittable: can be fitted when system has already been taken into
commission and under system pressure.
For water-based heating and cooling systems.
Accessories
Service Parts
Adapter for actuator with M30 x 1,5 connection
VA2500A001
Anti-tamper protection cap, for DN10 to DN25
VA2501A010
Anti-tamper protection cap, for DN32 to DN50
VA2501A032
Insulation shells for valves DN10 and DN15
VA2510C015
Insulation shells for valves DN20
VA2510C020
Insulation shells for valves DN25
VA2510C025
Insulation shells for valves DN32
VA2510C032
Insulation shells for valves DN40
VA2510C040
Insulation shells for valves DN50
VA2510C050
Draining and filling adapter
VA3500A001
V5012 Kombi-DP automatic Dp controller-kit, for 0.1 to 0.3 bar Dp setpoint
V5012C0103
V5012 Kombi-DP automatic Dp controller-kit, for 0.3 to 0.6 bar Dp setpoint
V5012C0306
V5012C Kombi-DP Diaphragm Unit
Materials Membrane housing made of stainless steel with EPDM membrane,
spindle and pipe connections made of brass
Medium type water or water-glycol mixture according to VDI 2035
Media temp. 2 ... 130
o
C
Static pressure PN10
Max. delta P 2 bar
Pre-setting yes
Position indication V5012C0103 optionally with installed external setpoint adapter
VA2503A001 (accessory).
Additional description Suitable for V5010 Kombi-3-plus BLUE DN10...40 and V5032 Kombi-
2-plus DN15...40.
Differential pressure setpoint range Type
bar
0,1 ... 0,3 V5012C0103
0,3 ... 0,6 V5012C0306
Auxiliary spring to reduce Dp range to 0.05-0.1 bar (only for V5012C0103)
VA2502A002
Setting adapter for external pre-setting (only for V5012C0103)
VA2503B001
Compression ring and nut R1/4 for 6 mm Cu-pipe
VS5500A008
Shutoff valve for impulse tube
VS5501A008
Stainless steel spindle assembly
VS2500KDP1
Compression ring and nut R1/4 for 4 mm Cu-pipe
VS5500A004