User guide

13-32
Thermostatic Radiator Valve Bodies
http://products.ecc.emea.honeywell.com/europe
2
3
4
5
6
7
8
9
10
11
12
13
14
Low-noise pre-settable thermostatic radiator valve body for very low flow rates. Exchange of valve
insert possible when system is under pressure and operating. AT-Concept. Flush function when fully
open.
For water-based heating systems.
FS type TRV bodies to EN215 (D)
FS type TRV bodies to EN215 (F)
FS type finely pre-settable TRV Body with Flush-Position (V2000FS)
Materials Valve body made of nickel-plated red bronze or hot-forged brass.
Valve insert made of brass with EPDM O-rings and soft seals and
stainless steel spindel, brown plastic pre-setting ring. Protection
cap made of brown plastic. Union-nut and tailpiece made of
nickel-plated brass.
Approvals EN215
Medium type water or water-glycol mixture according to VDI 2035
Media temp. 2 ... 130
o
C
Static pressure PN10
Max. delta P 2 bar
Closing dimension 11,5 mm
Stroke 2,5 mm
Body-head connection M30 x 1,5
Pre-settable yes
Colour of protection cap brown
Place in installation supply
Kvs value 0,51
Port connection type internal threads
Additional description Suitable connections see 'Connections for Radiator Valves'.
Body pattern DN size Connection diameter Heat exchanger connection Type
mm inch inch
angle to DIN 10 3/8 3/8 V2000EFS10
angle to DIN 15 1/2 1/2 V2000EFS15
angle to DIN 20 3/4 3/4 V2000EFS20
straight to DIN 10 3/8 3/8 V2000DFS10
straight to DIN 15 1/2 1/2 V2000DFS15
straight to DIN 20 3/4 3/4 V2000DFS20
Body pattern DN size Connection diameter Heat exchanger connection Type
mm inch inch
angle to NF 10 3/8 3/8 V2020EFS10
angle to NF 15 1/2 1/2 V2020EFS15
straight to NF 10 3/8 3/8 V2020DFS10
straight to NF 15 1/2 1/2 V2020DFS15