User guide

12-5
Wireless
2
3
4
5
6
7
8
10
9
11
12
13
14
Radiator controller with Radio Frequency communication to the HCM200D-xx Central Operating unit
or to the CM67z thermostat. The room temperature setpoint can be set with the HCM200D-xx and on
the controller. A display shows the setpoint temperature and the status functions. Because of bi-
directional communication (868 MHz), the boiler can be controlled depending on the heat demand.
The radiator controller can be fitted with ease to any conventional radiator valve (Honeywell,
Braukmann, MNG, Heimeier, Danfoss RA etc.).
Central operating units
Accessories
Valve adapters for HR80
RF Electronic radiator controller HR80
Control functions room temperature control, energy savings and self monitoring
functions for protection against valve plock and frost
Clock functions with HCM200D-xx: the time program is free programmable with a
daily/weekly program
Temp. setpoint range 8 ... 28
o
C
Temperature element NTC20k
Temp. element place built in
Frost protection temperature 6
o
C
Shut-off facility yes
Stroke 3,2 mm
Batteries included 2 x AA
Housing (HxWxD) 80 mm; 50 mm; 105 mm
Type
HR80
Operating unit for 1..16 zones HCM200D-xx
HCM200D-UK
Operating unit for 2 zones, CM67z
T6667Z1072
Protection cap for HR80
HVS80
Power supply for HCM200D-xx (plug-in socket)
HN10
Power supply transformer
HTU10
Power supply cabinet mounting
HTS10
RF handheld for mobile system control
HRD80
Vaillant
HCA1VEL
Oventrop
HU01
Herz HR
HU02
Danfoss RAV/RAVL/RA
EVA1-DANFOSS